Table of Contents
Advertisement
Maintenance
The key to maximum performance is emptying the Dirt Cup
frequently and cleaning the Filter. Emptying the Dirt Cup after each
use, and cleaning the Filter periodically, will help your GoVac
operate at peak efficiency.
To Empty your Filter
Make sure that the BISSELL GoVac is in the
1.
"OFF" position.
With BISSELL GoVac facing away from you, grasp Dust
2.
Cup in right hand and turn it toward you (toward the
back of the BISSELL GoVac).
Carry the Dust Cup, with filter in place, to a waste
3.
container. Remove Filter, empty debris, then replace Filter
in Dust Cup.
Replace Dust Cup by placing it in position and turning it
4.
away from you until it fits securely.
Clean exterior surfaces with a soft cloth dampened
5.
with water only. Do not use a strong detergent or other
cleaner - this may damage the finish. Always unplug the
BISSELL GoVac from the electrical outlet before cleaning
the surface.
After heavy usage, you may clean the Filter by gently
6.
rinsing it in a bowl of water and mild dish detergent.
Rinse thoroughly under running water and make certain
it is completely dry before replacing it. You may also
purchase replacement Filters.
Use only BISSELL Filters in the BISSELL GoVac. If
the Filter becomes damaged or becomes too dirty to
wash, you may purchase new filters by calling BISSELL
Consumer Services.
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
8 a.m. — 10 p.m. ET
Saturday
9 a.m. — 8 p.m. ET
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
WARNING:
Never operate the BISSELL
GoVac without the Filter in
place. Doing so may damage
the motor and void the war-
ranty.
9
Advertisement
Table of Contents
