How To Use This Guide - Bissell 3300 Series User Manual

Govac
Hide thumbs Also See for 3300 Series:
Table of Contents

Advertisement

How To Use This Guide

This User's Guide has been designed to help you get the most
satisfaction from the rechargeable BISSELL GoVac Cordless
Sweeper. Enclosed you'll find assembly instructions, tips for all
cleaning tasks, safety precautions, plus maintenance and
troubleshooting instructions.
Please read this Guide thoroughly before using your BISSELL
GoVac. Pay particular attention to the Product View, assembly
instructions and part names. Following the Guide will greatly
enhance your ability to get the best performance from your
BISSELL GoVac for many years.
How to Assemble the BISSELL GoVac
The BISSELL GoVac requires very little assembly. Remove it from
the box and check it against the illustration to familiarize yourself
with the components listed. The exploded view drawing with part
names will also be helpful if you should need to order a part at a
later time. Remember, components of your GoVac may vary
depending on the model you purchased.
Quick and Easy Assembly
Assemble the Handle by screwing together three (3)
1.
Metal Extension Handles. Place the colored Handle
Grip on top of the metal extension assembly and twist
clockwise until secure. Screw the D-shaped End into the
bottom of the Metal Extension Handle assembly.
Place bottom D-shaped End into the D-shaped opening
2.
at the top of the BISSELL GoVac. Push firmly until the
button at the bottom "clicks" into place in the opening.
Position GoVac in Charging Base (if so equipped), mak-
3.
ing sure that the GoVac Charging Port fits securely over
the Electrical Contact Post on the Charging Base.
Plug the Charging Base cord into a standard electrical
4.
outlet. The Indicator Light will glow red, showing that the
unit is charging.
Note: If you purchased Model 3301, the Charging
Base is replaced by a Charging Cord with
Transformer Plug. The Transformer plugs into
standard electrical outlet (120v-60hz); plug the
opposite end into the port on the motor side of
your GoVac. Your GoVac is now charging.
WARNING:
Electric/electronic appliances
should not be subjected to extreme
temperatures or high humidity. Do
not store the BISSELL GoVac in
bathing areas or close to stoves,
furnaces or radiators.
Tip:
Fully charge unit
before using. (See
Charging the
battery page 7.
5

Advertisement

Table of Contents
loading

Table of Contents