How To Use Your BISSELL GoVac
Your GoVac is a quick and easy way to clean up around the house,
inside the car or truck, or in the workroom.
Release the BISSELL GoVac from the Charging Base by
1.
lifting it straight up and out.
Tip back the Handle into typical use position and your
2.
BISSELL GoVac turns on by itself. To turn BISSELL GoVac
off, return Handle to upright position.
To clean stairs, vehicles or small areas, detach the
3.
Handle by depressing the button where the bottom of the
Handle slides into the BISSELL GoVac and pull the entire
Handle assembly out. Use the BISSELL GoVac by holding
the built-in hand grip.
When done, replace the Handle (if detached) and place
4.
the BISSELL GoVac in the Charging Base. Make certain
red charging light is on when GoVac is in place.
Note: For Model 3301, simply remove the
charging Plug from the port at the motor side of
the BISSELL GoVac, and use as above.
8
Off
On