Troubleshooting - Bissell 3300 Series User Manual

Govac
Hide thumbs Also See for 3300 Series:
Table of Contents

Advertisement

See the following instructions to dispose of the batteries after they have exceeded the battery life.
An adult must always remove and dispose of the batteries.
WARNING:
This product contains a nickel-cadmium (Ni-Cd) rechargeable
battery pack. According to Federal and State regulations, removal and proper
disposal of Ni-Cd batteries is required. For removal of the battery pack in your
BISSELL GoVac, see instructions below:
1. IMPORTANT: Unplug charger.
2. Remove handle and dust cup.
3. Remove (8) Phillips head screws on the bottom cover as shown in picture.
4. Separate top and bottom cover by applying outward force as shown in picture.
5. Remove wire connectors from the battery pack.
6. Keep Battery Pack together - DO NOT separate individual batteries.
For specific disposal instructions of batteries, please contact:
RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or
visit the website: www.rbrc.com
7. Discard remainder of product.
Caution: Opening the unit will destroy the appliance and invalidate the warranty.

Troubleshooting

Reduced Suction/No Suction.
Possible Causes
Filter is full
1
Not Powered/Underpowered.
Possible Causes
BISSELL GoVac not charged thoroughly
1
If suggested solutions for this or any function of the BISSELL GoVac do not correct the problem, call BISSELL
Consumer Services.
10
8 Screws
Remedies
Empty debris from Filter and clean.
1
Remedies
Check for red light on GoVac when it is in Charging Base
1
Is GoVac correctly seated in Charging Base.
2
Is cord completely connected at wall outlet.
3

Advertisement

Table of Contents
loading

Table of Contents