Oki 182 Handbook page 74

-
Ml182/183
­
-
ESC K CH R$(27);CH R$(75)
1 B 4B (hex)
Single Density
60 x 72 DPI
­
ML182 ML183
Max. dots/line 480 816
Max. dot res.
480
816
-
ESC L CH R$(27);CH R$ (76) 1 B 4C (hex)
Double Density, half speed 120 x 72 DPI
­
ML182 ML183
-
Max. dots/line
960
1632
Max. dot res.
960
1632
-
In this mode, the printhead slows down so it can print
dots that overlap by about 1/2 dot width.
­
ESC Y CH R$(27);CH R$(89) 1 B 59 (hex)
Double Density, normal speed 120 x 72 DPI
ML182 ML183
-
Max. dots/line
480
816
Max. dot res.
960
1632
-
This mode has the same density as ESC L and prints at
normal speed; however, you cannot print dots in the
-
same row in adjacent columns. In other words, after you
have printed a dot in one particular row, you can't print
on that row in the next column.
-
ESC Z CH R$ (27);CH R$ (90) 1 B SA (hex)
Quadruple Density
240 x 72 DPI
-
ML182
ML183
Max. dots/line 640 1088
­
Max. dot res. 1920
3264
This mode prints dot columns that overlap by about 3/4
dot width. It can print only every other dot on the same
­
row. In other words, after you have printed a dot in one
particular row, you can't print on that row in the next
column.
-
-
62