Oki 182 Handbook page 16

-
ML182/183 __________________________________
8. Put the platen knob shaft in the hole on the right side of the
printer.
9. Try a quick self test to make sure your new printer is working
properly. Insert a piece of computer paper (with sprocket holes)
or a single sheet of typing paper into the printer as you would
insert
it
in a typewriter. If you are unfamiliar with typewriters,
here is the method:
a. Open the paper release lever by sliding it toward you.
b. Insert the paper as far as you can into the slots provided by
the black paper guides.
-
-
8