Oki 182 Handbook page 35

_ _ _ _ _ _ _ _ _ _ _ _ CHAPTER 2 OPERATION
Rear Feed Paper Loading:
1. Set the printer on a desk or table.
2. Place the box of paper behind the printer.
-
3. Remove the access cover and lift the column indicator bar.
4. Open the paper release lever.
5. Insert the first sheet of paper in the paper guides.
6. Push the paper in just enough that its sprocket holes engage the
sprocket pins located on the platen ends.
7. Turn the platen knob to advance the paper until it appears in
front of the platen.
8. Lower the column indicator bar.
9. Close the paper release lever.
25