Oki 182 Handbook page 128

ML182/183 __________________________________
The file that follows was used to generate the sample text
for the IBM-Compatible ML182/183. The backs lash (j) that
appears within the sample text is the slash command.
Underlined characters are created by pressing the Ctrl and
the P key, followed by the character keys you wish to print
underlined. For example, OKI DATA was created by pressing
Ctrl, P, and then typing OKIDATA Pressing the Ctrl and the
P key a second time turns off the underline command.
<CR> represents the return key.
This user tip will describe how to use the ( UOKIDATA/\U
ML 182-1 and Sorcim's SuperWriter Ver. 1.03. This paragraph is
being printed in 10 cpi.<CR>
<CR>
<CR>
\cpi 17.1\<CR>
This paragraph is being printed at 17.1 cpi. Note that the left
and right margins do not have to be reset if the character pitch
is changed. In fact, it is possible to change the character pitch
several times in a single line.<CR>
<CR>
<CR>
\cpi 10\<CR,
The ML182-1 is capable of \cpi 5\ changing \cpi 10\ character
pitch in a single line. SuperWriter 1.03 will automatically adjust
the \cpi 5\QLEFTQ and QrightQ\cpi 10\ margins so that the user
does not have to reset them.<CR>
<CR>
<CR>
This is 10 cpi \cpi 17.1\ or 17.1 cpi. Don't forget that \cpi 8.5\
WIDE MODE \cpi 8.5\ is available. Well, \cpi 10\ back to 10 cpi
pitch size.<CR>
<CR>
<CR>
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
112