Oki 182 Handbook page 146

ML182/183 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
6. If you did not get the right printout, review what you got in ­
stead, to determine what went wrong.
NOTHING PRINTED:
a. Make sure you used the right print statement for your
computer.
b. Verify that your interface cable is connected properly.
c. Make sure your cable is wired to satisfy all the requirements
of both your compute and your printer. (Page 116 details the
printer's requirements.)
d. Make sure the printer is plugged in.
"PARITY ERROR" PRINTED:
A parity error occurs when the printer checks for an odd
number of binary digits and an even number is received or
vice versa. If you have switch
1
set to ON for odd parity,
try the OFF setting. If you have it OFF, try the ON setting
for even parity. Then turn the printer off and try the test
again.
If your problem still is not corrected, and your M L182/183
successfully performed the printer self-test, call your dealer or
OKIDATA GmbH for assistance.
-
-
-
-
-
-
-
-
-
-
-
128