Napoleon GVF42P Installation And Operating Instructions Manual page 17

REAR LOG SUPPORT
LEFT TAB REAR TABS
A. Prepare for log placement by ensuring the
left, rear, and right tabs of the log support and
fi rebox bottom are bent up to 90º, to aid in
locating the logs.
2
C. Move the two small logs 2 & 3 into posi-
tion, place holes in the bottom of the logs
over the studs located on the burner.
E. Place the bottom of the right crossover log
6 against the right tab of the log support
and against the grate. Place the top into the
pocket provided on log 5 and allow to rest
against the bracket of the log support.
RIGHT TAB
B.
3
D.
6
1
Place the back log 1 onto the base of the fi re-
box. Ensure that the back of the log rests against
the rear log support on the back wall of the fi re-
box, and behind the two rear tabs on the fi rebox
bottom.
5
4
Place the bottom of the left crossover log 4
against the left tab of the log support and
against the grate. Place the top of log 4
into the pocket provided on the back log 1
Position the notch located on the end of the
center log 5 against the centre grate post
with the other end of the log resting in the
pocket of log 4 .
17
REAR TABS
W415-0379 / E / 04.24.12