Press "Prog" key once, it will
search the network.
2
If the ZTS-100 is added into the
network, the signal of "done" will
be shown.
3
Inclusion is completed.
Press "Home" key once to go
back to the home page.
4
Delete (Exclusion) ZTS-100 from Gateway / Controller Z-Wave network
Step Procedure / Description
Gateway / Controller device should
entry the Exclusion mode.
Press and hold "Home" key for 2
1
seconds to entry the Add
(Inclusion) / Delete (Exclusion)
Mode.
Press "Prog" key once, it will
search the network.
2
LCD indication
23