Z-Wave ZTS-100 User Manual page 20

Press "Prog＂ key once to
confirm the setting and it will go to
hour setting.
3
Hour will keep flashing, press
Up/Down key to set hour.
Press "Prog＂ key once to
confirm the setting and it will go to
minutes setting.
4
Minutes will keep flashing, press
Up/Down key to set minutes.
Press and hold "UP" and "DOWN"
key for 2 seconds to disable /
enable event during the time
setting.
If the event is disabled, "OFF" will
be displayed.
5
If the event is enabled, time will be
displayed and Hour will keep
flashing.
Press "Prog＂ key once to
confirm the setting and it will go to
target setting.
If the event is enabled, it will go to
6 target setting.
Target will keep flashing, press
Up/Down key to adjust Heat set
point for heating.
20
⇓