Z-Wave ZTS-100 User Manual page 32

COOL Mode:
thermostat controls the temperature according to the following diagram
Off
Example for Cooling: (Set point = 80 °F, Swing = 1 °F)
=> Cooler turns on when room temp is 81 °F and off at 79 °F.
AUTO: thermostat controls the temperature according to the following diagram
Output
nd
2 Turn on
st
1
Off
There is a dead band 4°F/2°C between heat set point and cool set point.
Example 1: If user select heat set point is 70F, the minimum cool set point will be limited
at "heat set point + 4°F: 74°F
Pervious heat set point is 70°F and cool set point is 74°F
Example 2: If user changes heat set point to 72F, cool set point will be updated to 76°F
automatically to maintain the dead band.
Set point
Turn off
Swing
Heat Set point
nd
2 Turn off
Turn on
Diff
swing
Cool
Turn on
Cool Set point
st
1 Turn off
Heat
Dead band
32
Temperature
Temperature
swing