Introduction - Z-Wave ZTS-100 User Manual

ZTS-100 / ZTS-110 Z-Thermostat

Introduction

Welcome to the Z-Wave world of home automation, your ZTS-100 Z-Thermostat (Figure 1) is a
comfort control master that allows to control your room temperature with programmable time
schedule WAKE, AWAY, HOME and SLEEP event which can maximize energy conservation and
comfort while minimizing the effort required to maintain the appropriate temperature in your home
whether you are at home or away.
Also, it can be utilized to control / check your room temperature by the smart phone or PC while you
are at office, home anywhere or around the world which can go through the Z-Wave gateway
control.
ZTS-100 can be configured as either "Frequently Listening Routing Slaves" (FLiRS) or "Always
Listening" node and it will distinguish the power source (batteries or 24Vac) automatically and
switch to appropriate mode during inclusion stage.
FLiRS node type is targeted for battery operated applications and will enter sleep mode frequently in
order to conserve battery consumption that can provide flexibility if there is out of 24Vac power line.
Always Listening node type is targeted for AC power operated applications and it can act as a
repeater, which will re-transmit the RF signal to ensure that the signal is received by its intended
destination by routing the signal around obstacle and radio dead spots.
Figure 1. ZTS-100 / ZTS-110
3