Download Print this page

AudioCodes 320HD Quick Manual

300hd series ip phones
Hide thumbs Also See for 320HD:

Advertisement

AudioCodes 300HD Series IP Phones
5. Basic Phone Operation (Cont.)
To transfer a call:
1.
During a call, press the TRANSFER key, enter the phone number to where you want to
transfer the call, and then press the Dial softkey.
2.
Either wait until the call is established, speak to the second party and then press the
Trans softkey, or press the Trans softkey once the called party is ringing to transfer
the call without speaking to the party.
To make a three-way conference call:
1.
Make a call to the first participant of the conference call.
2.
Press the Conf softkey (first partcipant is put on hold), and then make a call to the
second participant.
When the second party answers, press the Conf softkey to include all participants in
3.
the call.
To end the three‐way conference call, you can either hang up the phone or press the End
softkey.
This Quick Guide describes the quick setup for AudioCodes 320HD IP Phone, Version
1.4.0. If you have a later software version, please verify with AudioCodes that the
information in this document is compatible with your IP Phone.
Information contained in this document is believed to be accurate and reliable at the time
of printing. However, due to ongoing product improvements and revisions, AudioCodes
cannot guarantee accuracy of printed material after the Date Published nor can it accept
responsibility for errors or omissions. Updates to this document and other documents as
well as software updates can be viewed by registered customers on AudioCodes' Web
site at www.audiocodes.com/downloads.
© Copyright 2010 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: July-21-2010
Document #: LTRT-11803
Notice
AudioCodes 300HD Series IP Phones
320HD
Quick Guide
1. Before Installing
Congratulations on purchasing your 320HD IP Phone! Before you begin using the phone,
ensure that the following items are included in your 320HD IP Phone box:
IP Phone Unit
AC Power Adapter (Optional)
Ethernet Cable
2. Physical Description
The phone's front view areas are shown below:
1.
LCD screen
2.
Incoming call indication LED
3.
Speed Dial keys
4.
VOICE MAIL key
5.
Four-way Navigation keys
6.
ENTER key
7.
MENU key
8.
REDIAL key
9.
MUTE key with LED
10.
TRANSFER key
11.
HOLD key
12.
SPEAKER key
13.
HEADSET key
14.
VOLUME key
Important:
It is highly recommended to check for an
updated software version for your phone at
www.audiocodes.com/downloads.
Handset
Wall-mounting Screws
15.
Alphanumerical keypad
16.
LINE keys
17.
Softkeys

Advertisement

loading

Summary of Contents for AudioCodes 320HD

  • Page 1 Either wait until the call is established, speak to the second party and then press the Congratulations on purchasing your 320HD IP Phone! Before you begin using the phone, Trans softkey, or press the Trans softkey once the called party is ringing to transfer ensure that the following items are included in your 320HD IP Phone box: the call without speaking to the party.
  • Page 2 AudioCodes 300HD Series IP Phones AudioCodes 300HD Series IP Phones 3. Cabling the Phone 5. Basic Phone Operation To make a call: Follow the procedure below for cabling your phone. Handset: pick up the handset, enter the phone number, and then press the Dial To cable the phone: softkey or wait a few seconds until the phone automatically dials the number.