Control Functions; Control Panel (All Models Except Metro) - Sundance Spas Camden Owner's Manual

8.0

Control Functions

8.1 Control Panel (All Models Except Metro)

A. LED Display: can display
current water temperature
(default display), water
temperature set point,
selected filtration/heating
mode, and error messages.
B. Heat Indicator: lit when heater is on.
C. Warmer ( ∆ ) Button: increases water temperature set point.
D. Cooler (
E. Jets 1 Button: turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump #1 off.
F. Jets 2 Button (Certa/Chelsee/Hamilton Models): turns high-speed
jets pump #2 on and off. Press once to turn on; press a second time
to turn pump #2 off.
G. Light On/Off Button: Turns waterfall, footwell and control lights on
in unison. Press once for high intensity; press a second time for
medium intensity; press a third time for low intensity; press a fourth
time to turn off. The displayed color is changed using the light mode
button (H) below.
H. Light Mode Button: Selects one of 7 color modes for waterfall, foot-
well and control lights. See page 25 for additional information.
Operation Details
• Temperature Adjustment: 65-104 °F (18-40 °C). Factory default set-
ting is 100 °F (38 °C).
• Underwater Light Operation: light runs for approximately 1 hour then
shuts off.
• Jets 1/Jets 2 Button Operation: jets run for 20 minutes after acti-
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
Page 20
) Button: decreases water temperature set point.
A B C A B C
D D E E
1 1
H H
G G
F F
2 2