Control Functions; Control Panel - Sundance Spas Camdenl Certa Owner's Manual

8.0

Control Functions

8.1

Control Panel

A. LED Display: can display
current water temperature
(default display), water tem-
perature set point, selected
filtration/heating mode, and
error messages.
B. Heat Indicator: lit when heater is on.
C. Warmer (
D. Cooler (
E. Jets 1 Button: turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump #1 off.
F. Jets 2 Button (Certa/Chelsee/Hamilton Models): turns high-speed
jets pump #2 on and off. Press once to turn on; press a second time
to turn pump #2 off.
G. Light On/Off Button: Turns waterfall, footwell, massage selec-
tor and air control lights on in unison. Press once for high intensity;
press a second time for medium intensity; press a third time for
low intensity; press a fourth time to turn off. The displayed color is
changed using the light mode button (H) below.
H. Light Mode Button: Selects one of 7 color modes for waterfall,
footwell, massage selector and air control lights. See page 24 for
additional information.
Operation Details
• Temperature Adjustment: 65-104 °F (18-40 °C). Factory default set-
ting is 100 °F (38 °C).
• All lighting systems run for 2 hours then shut off.
• Jets 1/Jets 2 Button Operation: jets run for 20 minutes after acti-
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
) Button: increases water temperature set point.
) Button: decreases water temperature set point.
A B C
D E
1
2 Pump Panel Shown
H
G
F
2
Page 21