Sundance Spas Camden Owner's Manual page 57

17. Tuning UP/DOWN Buttons: Press Track Up to manually adjust sta-
tion frequency up. Press and hold Track Up to scan for next higher
station. Scan mode stops as soon as a strong station is found. Press
Track Down to manually adjust frequency down. Press and hold
Track Down to scan for next lower station. Scan mode stops as soon
as a strong station is found. In CD mode pressing these buttons will
advance the CD up or down to the next or previous track. To fast
forward or rewind through a track, simply press and hold either but-
ton as desired during CD playback.
18. Reset Button (Not Illustrated): If keys do not function at all and the
unit appears to be "locked up", use a ballpoint pen to press the Reset
Button under the front panel (press OPEN to flip down front panel for
access). The Reset button is located directly below the Eject Button.
Press to clear all memory (except station presets) and reset deck.
Note: this action will reset the display and clock to default settings.
19. Eject Button (Not Illustrated): To eject CD, press OPEN and flip-
down the front access panel, then press the Eject button located to
the left of CD slot.
20. USA/Europe Switch (Not Illustrated): You can switch between
American (USA) and European radio frequency bands by flipping a
switch located on the bottom of the deck. To change bands:
1) Power down unit
2) Lift up sticker under the CD player.
3) Choose desired frequency band as indicated on the sticker.
4) Put sticker back in place and power up the unit.
21. Setting The Clock (Unit Must be Off): To set the current time, press
and hold Display (6) for 3 seconds until the clock display starts to
blink, then set hours using the Track Up and/or Track Down button
(17). Press Display a second time to set minutes, using the Track Up
and/or Track Down buttons. Press and hold Display a third time to
exit clock setup (or simply wait for 5 seconds).
22. Selecting Weather Band Mode: Press BND (16) while in tuner
mode until WB displays (deck automatically skips to the strongest
weather channel) or press BND a second time to return to previous
mode. When WB weather band mode is active:
1) Press Track Up (17) to scan to higher weather channel.
2) Press Track Down (17) to scan to lower weather channel.
3) To save a weather channel preset, press and hold one of six
.
Page 51