Table of Contents
Advertisement
WARNING
To avoid electrical shock, personal injury or death, be sure that field
wiring complies with local and national fire, safety, and electrical
codes, and voltage to the system is within the limits shown in the
job-specific drawings and unit electrical data plate(s). Power supply
to unit must be disconnected when making field connections.
Rigorously adhere to field wiring procedures regarding proper
lockout and tagout of components.
Electric Heating
Table 30 - Standard Motor Electric Heat Capacities, Amps, Wire Sizing, and Over Current Protection
# Amps at unit voltage, 60Hz, single phase
Note: Unit wire sizing should be determined in accordance with NEC and local codes.
* External static pressure ranges must be strictly adhered to.
Page 50 of 60
IM 817-4
Hide quick links:
Advertisement
Table of Contents
