TEC MA-1350-1 Series Programming Manual page 31

Address : 5
([AT/TL] Key Function)
Bit
No.
1 Total Function
2 Tender Function
3 to 7
8 Validation Compulsory
Supplementary Description for Address 5:
Bit 1 & 2: If both RESET or both SET, the [AT/TL] key functions as tender and total key.
Bit 8: SET status .................... When the [AT/TL] key is operated, the SLIP lamp will flicker to prohibit
Initial SET Bit Nos.
Your Selection
Content
--vacant--
all the operations (including control lock position change and cashier
key change) other than the validation print. The status of this bit is
applicable in the REG or MGR position, and is not applicable in the
" - " position. When the [AT/TL] key is depressed, the drawer will not
open. It will open when the [VALIDATE] key is depressed.
- 29 -
MA-1350-1 SERIES
Selective Status
RESET
TOTAL FUNC-
Follow Bit 2 status.
TION only
TENDER FUNC-
Follow Bit 1 status.
TION only
COMPULSORY
NOT COMPULSORY
EO3-11084
0
SET