TEC MA-1350-1 Series Programming Manual page 48

Address : 2
(Optional Functions 8)
Bit
No.
1 Negative Mode ( - ) Operations
2 [% I] Key Use
3 [% II] Key Use
4 Customer's Display Method
5 [RECEIPT ISSUE] key Function
6 Sales Total Amount Print on Receipt
7 FOOD STAMP (Illinois)
8 FOOD STAMP (New Jersey)
Supplementary Description for Address 22:
Bits 2 & 3:
Bit 6: If SET status is selected, Sales Total Amount will be printed on the last line of the receipt. No-
sale, Received-on-Account, Paid Out and Previous Balance transactions are excluded.
Bits 7 & 8:
Initial SET Bit Nos.
2
Your Selection
Content
Selection of the % I and % II keys use. If SET status is selected to Bit 2, both % I and
% II will be used as [% -]. If SET status is selected to Bit 3, both % I and % II will be used
as [% +]. Be certain to change the Financial Total Names corresponding to each % key
if changed as shown above.
If both RESET, General Type Feature can be obtained.
ALLOWED
USED AS [% +]
USED AS [% -]
ORDINARY TYPE
(Incemental Display)
Effective only when
the R OFF lamp is
NON-PRINT
GENERAL TYPE, or
follow bit 8 status.
GENERAL TYPE, or
follow bit 7 status.
- 46 -
MA-1350-1 SERIES
Selective Status
RESET SET
PROHIBITED
USED AS [% -]
KEY KEY
USED AS [% +]
KEY KEY
PUT-AWAY TYPE
(Holding Display)
Regardless of the R
OFF lamp status
illuminated.
PRINT
Illinois TYPE
New Jersey TYPE
EO3-11084
0