TEC MA-1350-1 Series Programming Manual page 36

Address : 1
(Optional Functions 2)
Bit
No.
1 Short-tendering using any media key. (applicable to [AT/TL],
[CHECK TEND], [chg], [MISC], [CPN], [$5.00], [$10.00],
[CASH3]
2
3 Sum of all Departmrnts (except Other Income Departments)
and all Department Groups on Financial Reports
4 Sum of Other Income Department on Financial Reports
5 Department/Financial Items Zero-skip
6
7 Department Group Sales Ratio on the Financial (or Depart-
ment) Report (in X and Z modes)
8
Supplementary Description for Address 11:
Bit 5: If SET status is selected, the Department/Financial Items with sales data 0 will not be printed.
This bit status selection is applied to all the reports except the PLU Read Report.
Department Group Sales Ratio = Department Group Amount ÷ Sum of All Department Groups
Bit 7:
• If "Sum of All Department Groups" is negative value, the sales ratio will not be calculated,
and "0.00%" will be printed.
• If "Department Group Amount" is negative amount, the negative mark " - " will be attached.
• Fraction rounding for the decimal portion of the calculated result is fixed to Round Off.
• "Sum of All Department Groups" also includes the amounts of Other Income and Negative
Status Departments.)
Initial SET Bit Nos.
1
Your Selection
Content
-- vacant --
-- vacant --
-- vacant --
NON-PRINT
NON-PRINT
Prints All Data
- 34 -
MA-1350-1 SERIES
Selective Status
RESET SET
ALLOWED
PROHIBITED
PRINT
PRINT
Zero-skip
PRINT
NON-PRINT
EO3-11084
0