Component Description - Asko TD70 Service Manual

Service Manual TD70

Component description

Article no. Component
80 761 03 Microswitch float
Overflow guard
Heating element 1950 W Heater 1: 1950 W, 24.5 Ω
80 824 92
80 915 90 Heating element 2500
W
80 824 91 Heating element 3000
W
80 821 22 Base heat pump
complete
80 821 23 Base heat pump
complete
80 88 415 Reversing valve
88 015 18 Control unit compl.
TD70.1 A
88 015 19 Control unit compl.
TD70.1 B
88 015 20 Control unit complete
TD70.2
88 015 21 Control unit complete
TD70.2 HP/HWC
88 015 00 Control unit complete
TD70.3
88 015 01 Control unit complete
TD70.3 FI
80 846 49 LED-light compl.
Measurement value
Heater 1: 1950 W, 24.5 Ω
Heater 2: 550 W, 91.4 Ω
Heater 1: 1950 W, 24.5 Ω
Heater 2: 1050 W, 45.5 Ω
1.9 kΩ
Comment
If both containers in the tumble dryer
are full the program is stopped by a float
switch installed in the lower container.
"Over flow" is indicated on the display.
50 Hz
60 Hz
The control unit contains
microprocessors for controlling
programs, the motor, the heating
elements etc.
LED-technology for the machine's
internal light.
11