Panasonic Workio DP-C262 Security Manual page 11

Copy Selects the copy function.
Fax Selects the fax function.
Print Selects the printer function.
Scan Selects the scanner function.
Note:
The Sender Selection feature is not enabled if the
fax function is set to require user authentication.
For details, refer to the Operating Instructions for
Function Parameters, Fax Parameter No. 145.
Select "On" to use authentication or "Off" to
disable authentication, and then select "OK" .
On Disables authentication.
Off Enables authentication.
When user authentication is enabled for the fi rst
time, you also need to specify the Time Zone,
system administrator's name, and password.
Enter the Time Zone between -12:00 to +12:00
and then select "OK".
∗
Press " " key fi rst when entering between
-12:00 to -00:30.
Enter the system administrator name, and then
select "OK" .
Eg: panasonic
Enter the system administrator password, and
then select "OK" .
Eg: pana
Note:
The administrator name and password set here are
required in subsequent setup operations (see page
22 ). Please keep it in a safe place.
The function selection display appears (return
to step 6).
To continue with the setup, select the function,
select "On" or "Off" , and then select "OK" .
Press the Reset key to return to standby.
11