Table of Contents
Advertisement
Compatible Applications
The BradyPrinter S3000 is compatible with Brady
When used with Brady Workstation software, the printer will automatically recognize all enabled and
compatible materials up to 4 in. (101.6 mm) wide. For operation of the printer with other software, refer
to the documentation for your application.
Note: Only BradyPrinter S3000 supplies will work with this printer.
System Specifications
•
Weight: 11.5 lbs (5.2 kg)
•
Dimensions (stored): 9 in. x 12.0 in. x 9.5 in. (22.9 cm x 30.5 cm x 24.1 cm)
•
Operating Temperature: 50 - 104°F (10-40°C)
•
Relative Humidity: 10% to 80% RH non-condensing
•
Storage: -4 to 122°F (-20 to 50°C) at 15% to 90% RH non-condensing
•
Voltage: 100-240 VAC 50/60 Hz, 2A
•
Print Resolution: 11.8 dot/mm, 300 dpi
•
Output label size: 0.5 in. to 4 in. (12.7 mm to 101.6 mm)
•
Maximum label length (continuous): 60 in. (1.5 m)
Button Actions
There are three physical buttons on the front of the printer. Their function is described below.
•
•
•
BradyPrinter S3000
The power button turns the printer on/off and is also used for sleep mode (see
The feed button advances the label. See
The cut button allows you to manually cut the label.
®
Workstation desktop software.
page 19
for more information.
Introduction
Compatible Applications
page
6).
2
Hide quick links:
Advertisement
Table of Contents
