Barcode; Barcode Settings - Brady BMP 41 User Manual

Barcode

Barcode data can be displayed in the same line as other data (text or symbols). It is not
necessary to have a separate area for the barcode. Barcode data on the same line as text will
not overwrite the text already on the line but will be placed next to it.

Barcode Settings

Field
Barcode Symbology
Ratio
Height
Width
Human Readable
Check Digit
To change any of the barcode settings:
Press Label Settings
1.
Navigate to Barcode main menu.
2.
Press Enter
3.
®
The Label Printer supports Code 128 and Code 39
BMP 41
barcode symbology.
The ratios available are 2:1 and 3:1.
The height of the bars in a barcode can vary, with a
minimum of 0.1 inch (2.54 mm) and a maximum of 1.2
inches (30.48 mm).
The width of the narrow bar of a barcode is 1, 2, or 3 dots.
Human Readable text can be placed above or below the barcode, or
you can choose not to display it.
A check digit is used for error detection when using a Code 39
barcode. You can turn the check digit function on or off.
.
.
Labels and Areas
To Use
BMP ® 41 User's Manual
59
Barcode