Table of Contents
Advertisement
36
Placing the Ember Material
Two bags of ember material are shipped with this gas
fireplace. Use only a portion of each bag for the best
appearance and operation.
To place the ember material:
• Remove latches and tension springs around the glass door.
• Remove the glass door from the unit (Figure 33).
LATCHES
(BOTH TOP
AND BOTTOM)
GLASS
ASSEMBLY
Figure 33. Glass Assembly
• Place small pieces of ember material on burner top (Figure
34). Do NOT press embers into burner ports. Cover the
top of the burner with a single layer of ember material. Do
NOT place embers on the ports as noted in Figure 34.
Figure 34. Placement of the Ember Material
• Save the remaining ember materials for use during fire-
place servicing.
• Replace the glass door and a front trim door on the unit
(see Replacement Parts Section of the manual.)
• Replace the latches and tension springs.
Advertisement
Table of Contents
