HYOSUNG RT125D Owner's Manual page 61

◉ ◉ HEAD LAMP
1. Remove the two screw ①
and the head lamp assembly.
2. Disconnect the head lamp coupler.
3. Remove the dust cover ②
spring ③ .
4. After removing the bulb at the socket,
replace the new bulb.
5. To install the head lamp, reverse the
above sequence.
CAUTION
The use of a lamp other than rules may
cause to occur the vehicle fire and to
damage electric parts.
Surely use only the lamp of proper
capacity.
�
(right and left)
�
and socket
◉ ◉ TURN SIGNAL LAMP
1. Remove the lens by removing the screw.
2. Push the bulb, turn it to the counter-
clockwise, and pull it out.
3. After stick in the new lamp, assemble the
lens.
Overtightening the screws may cause
the lens to crack.
�
60
CAUTION