HYOSUNG RT125D Owner's Manual page 57

● ● BRAKE LINING WEAR LIMIT
The motorcycle is equipped with the brake
lining wear limit indicators on the rear
brakes.
To check wear of the brake shoe, perform
the following :
①
Check if the brake system is properly
adjusted.
②
While fully applying the brake, check to
see that the extension line of the index
mark is within the range on the brake
panel.
③
If the extension line is beyond the range,
have the brake shoe assembly replaced
by your Hyosung dealer to ensure safe
operation.
WARNING
Riding with worn brake shoe will reduce
braking performance and will increase
your chance of having an accident.
Inspect brake shoe wear before each
use. Ask your Hyosung dealer or
qualified mechanic to replace brake
shoe if the shoes are worn to the limit.
● ● REAR BRAKE LAMP SWITCH
The rear brake lamp switch is located at
right-side of the engine.
Move the switch up or down to adjust it
until the switch operates and turns on the
brake lamp after the brake pedal begins to
be depressed.
56