Figure 8-27 Removing The Paper-Pass Sensor 2 - Tektronix Phaser 440 Service Manual

8
FRU Disassembly/Assembly
8-34 Phaser 440 Color Printer
4. Remove the four screws securing the top half of the paper-feed
module. Separate the two halves and flip over the upper half.
5. Unclip paper-pass sensor 2 and remove it and its wiring harness
leading to the paper-feed circuit board.

Figure 8-27 Removing the paper-pass sensor 2

Reverse these steps to reinstall paper-pass sensor 2.
5
8699-50