Your First Login Session
In order to complete the setup process for the switch, you must
complete the following steps during your first login session:
• Log in to the switch
• Set IP address information for the Ethernet
Management Port (EMP)
• Unlock session types
• Change the login password
• Set the date and time
• Set optional system information
• Save your changes
Important. You must be connected to the switch via the
console port before initiating your first login session.
October 2010
Logging In to the Switch
When you first log in to the switch, you will be prompted for a
CMM login name and password. Use the switch's default
settings:
• CMM login: admin
• Password: switch
The default welcome banner, which includes information such
as the current software version and system date, is displayed
followed by the CLI command prompt:
+++ WARNING! Switch Access Vulnerability.
+++ WARNING! Admin user authentication using
default password.
Welcome to the Alcatel-Lucent OS10K
7.1.1.1198.R01, October 15, 2010.
Copyright (c) 1994-2010 Alcatel-Lucent. All
Rights Reserved.
OmniSwitch(tm) is a trademark of Alcatel-Lucent,
registered in the United States Patent and
Trademark Office.
->
Your First Login Session
13