Figure 6-28 D Term Analog Cordless Terminal - NEC Electra Elite 192 Hardware Manual

Issue 6
S 12
ECTION
term ®
I
NSTALLING A D
A C
NALOG ORDLESS
T
ERMINAL
6 - 24
12.1 Selecting an Installation Location
Select a location to avoid excessive heat or humidity. The base
unit should be placed on a desk or tabletop near a standard 120
Vac outlet and within reach of the telephone line connection on the
Electra Elite Multiline Terminal.
handset away from sources of electrical noise (e.g. fluorescent
lighting).
12.2 Connecting the Telephone Cord
The DTR-1R-1 D
analog port on the KSU using one of the following: SLI(4)/(8)-U10
or OPX(2)-U10 ETU, SLT(1)-U10 ADP, or APR-U Unit connected
to the multiline terminal. A TEL LINE jack is located on back of the
base unit of the D
Observe
installation.
Never install telephone wiring during a lightning storm.
¥
term
Figure 6-28 D Analog Cordless Terminal
term
Analog Cordless terminal is connected to an
term
Analog Cordless terminal.
the following
Installing Electra Elite Multiline Terminals
Electra Elite
Keep the base unit and the
warnings during