Figure 4-26 Attaching The Frame Ground Plate - NEC Electra Elite 192 Hardware Manual

Electra Elite
System Hardware Manual
2. To connect an Expansion KSU, use the two screws
to attach the FG plate to the Basic and Expansion
KSUs. Refer to
Ground
KSU, another FG plate is required.)

Figure 4-26 Attaching the Frame Ground Plate

3.10.2 Grounding Requirements
The KSUs must be properly grounded. The Electra Elite
KSUs are provided with a typical AC third-wire ground. If
this ground is questionable, an alternative ground must
be provided.
1. Connect the grounding cable (green wire) to the
ground terminal on the right side of the Basic KSU.
The locally provided grounding cable AWG must be
greater than #16.
Figure 4-26 Attaching the Frame
Plate. (When installing a second Expansion
Issue 6
FG Plate
4 - 27