Figure 6-20 Locating The Adjustment Tabs On The Multiline Terminal; Figure 6-21 Raising The Base Plate On The Multiline Terminal - NEC Electra Elite 192 Hardware Manual

Electra Elite
S 9
ECTION
A
DJUSTING THE
H
EIGHT OF THE
M T
ULTILINE ERMINAL
System Hardware Manual
The base plate on the Electra Elite Multiline Terminal is hinged to allow
adjustment to raise or lower the terminal.
1. Turn the Multiline Terminal upside down and locate the tabs as
shown in Figure 6-20 Locating the Adjustment Tabs on the Multiline
Terminal.
Figure 6-20 Locating the Adjustment Tabs on the Multiline
2. Push the adjustment tabs and raise the base plate until it locks.

Figure 6-21 Raising the Base Plate on the Multiline Terminal

Terminal
Issue 6
6 - 17