Figure 6-11 Connecting A Multiline Terminal To The System; Figure 6-12 Leading Line Cords On A Multiline Terminal - NEC Electra Elite 192 Hardware Manual

Electra Elite
S 4
ECTION
C
ONNECTING A
M T
ULTILINE ERMINAL
S
TO THE YSTEM
System Hardware Manual
The instructions for connecting a Multiline Terminal to the system applies
to all of the Electra Elite Multiline Terminals.
1. Plug the telephone cord into the modular jack on the bottom side of
the Multiline Terminal. The handset is also attached to the bottom
side of the Multiline Terminal.

Figure 6-11 Connecting a Multiline Terminal to the System

2. Lead the telephone and handset cords through the appropriate
grooves.

Figure 6-12 Leading Line Cords on a Multiline Terminal

Issue 6
6 - 11