Figure 6-16 Installing Line Card And Plastic Panel On A Multiline Terminal - NEC Electra Elite 192 Hardware Manual

Issue 6
S 7
ECTION
I L
NSTALLING INE
C P
ARDS AND LASTIC
P
ANELS
6 - 14
7.1 Line Card and Plastic Panel Installation
Line Cards can be used to print the line key designations. They are
then placed on the Multiline Terminal to provide a quick reference
of key designations to the Multiline Terminal users. The Line Cards
can be changed as necessary. The Plastic Panel is placed on top
of the Line Card to hold it in place.
1. Place the Line Card over the keys on the Multiline Terminal.
2. Place the tabs on the bottom of the plastic panel into the
grooves at the terminal bottom, and press top right and left
ends to secure plastic panel to the Multiline Terminal. Refer to
Figure 6-16 Installing Line Card and Plastic Panel on a
Multiline Terminal
a Multiline
Figure 6-16 Installing Line Card and Plastic Panel on a Multiline
and Figure 6-17 Installing Plastic Panel on
Terminal.
Terminal
Installing Electra Elite Multiline Terminals
Electra Elite