Viessmann VITODENS 333 Service Instructions Manual page 48

Coding
Code 2
(cont.)
Coding in Function mode
the as
delivered
condition
Address:
value
59:0 DHW cylinder loading:
Starting point -2.5 K
Stopping point +2.5 K
60:10 During DHW loading,
the boiler water tem-
perature is a maximum
of 20 K higher than the
set DHW temperature
62:2 Circulation pump with 2
minutes run-on time
63:0 * 1
Without auxiliary func-
tion for DHW loading
65:... Information regarding
the type of diverter
valve (not adjustable)
6C:100 Set speed internal DHW
loading pump 100 %
6F:100 Max. output during
DHW loading 100 %,
defaulted by the boiler
coding card
*1
Only for constant temperature control units.
48
Coding Possible change
change
Address:
value
59:1 Starting point adjustable
to from 1 to 10 K below the
59:10 set value
60:5 The difference between
to the boiler water tempera-
60:25 ture and the set DHW
temperature is adjustable
from 10 to 50 K
62:0 Circulation pump without
run-on
62:1 Run-on time adjustable
to from 1 to 15 minutes
62:15
63:1 Additional function: 1 x
daily
63:2 Every 2 to every 14 days
to
63:14
63:15 2 x daily
65:0 Without diverter valve
65:1 Diverter valve by Viess-
mann
65:2 Diverter valve by Wilo
65:3 Diverter valve by Grund-
fos
6C:0 Set speed adjustable
to from 0 to 100 %
6C:100
6F:0 Max. output during DHW
to loading adjustable from 0
6F:100 to 100 %