Garmin G300 Pilot's Manual page 254

appendix C
Updating G300 Databases:
Equipment required to perform the update:
• Windows-compatible PC computer (Windows 2000 or XP recommended)
• SanDisk SD Card Reader or equivalent
• Updated database obtained from the flyGarmin website
• SD Card, 2 GB recommended (Garmin recommends SanDisk or Toshiba)
1) After the data has been copied to the SD Card, insert the SD card in
the SD card slot of the display.
2) Power on the display. The Update Databases Page is displayed. A
green checkbox indicates that the database already installed on the
G300 is up to date. An empty checkbox indicates that the database on
the SD card is more current and should be installed.
3) With 'Update All' highlighted, press the ENT Key. The database status
is updated.
236
Update Databases Page
Update Databases Page
Garmin G300 Pilot's Guide 190-00921-00 Rev. D