Garmin G300 Pilot's Manual page 127

Direct-to Window (Flight Plan Waypoints Selected)
Selecting a nearby airport as a direct-to destination:
1) Press the NRST Key.
2) Select the desired airport (the nearest one is already selected).
3) Press the Direct-to Key.
4) Press the ENT Key.
5) With 'Activate' highlighted, press the ENT Key.
Direct-to destinations may also be selected by using the pointer on the navigation
map pages. If no airport, NAVAID, or user waypoint exists at the desired location,
a temporary waypoint named 'MAP POINTER' is automatically created at the
location of the map arrow.
Selecting a waypoint as a direct-to destination using the
pointer:
1) From a navigation map page, press the FMS Joystick to display the
pointer.
2) Move the FMS Joystick to place the pointer at the desired destination
location.
3) If the pointer is placed on an existing airport, NAVAID, or user
waypoint, the waypoint name is highlighted.
4) Press the Direct-to Key to display the Direct-to Window with the
selected point entered as the direct-to destination.
190-00921-00 Rev. D
(Single Display)
Garmin G300 Pilot's Guide
gPS navigation
109