Console Removal; Door Removal - Maytag MAH6700AW Series Service

Disassembly Procedures
!
5. Remove attachment screws and lift dipenser to
expose fill hose.
6. Remove fill hose clamp and hose.

Console Removal

1. Disconnect power supply to unit.
2. Remove Top Cover (See "Top Cover Removal").
3. Remove Dispenser (See "Dispenser Removal").
4. Remove five screws attaching Console.
©2006 Maytag Services
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
5. Tilt the panel forward enough to grasp with your left
hand, then gently hit the lower right corner of the panel
to unhook it from the cabinet. Repeat the process for
the left side of the panel. Roll Console down and lift
away from washer.
6. Remove Reactor wire from wire clip.
7. Remove the Reactor wire harness connectors from the
PCB Board.
8. Remove five screws from PCB Housing to access the
LED Circuit Board.

Door Removal

1. Disconnect power supply to unit.
2. Remove four screws to remove door from Front Panel.
16026186 27