Maytag MAH6700AW Series Service page 37

Disassembly Procedures
!
22. Grasp the front and rear of the tub and slide out. Use a
blanket or rug to protect the floor.
23. Set the tub on the floor. Position 4" wood blocks or
equivalent around the spinner shaft. Roll the tub to the
upright position and rest it on the blocks.
.
©2006 Maytag Services
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
24. Remove the 10mm screws around the perimeter of the
tub.
NOTE: Torque tub bolts to 6-11 ft. lbs.
25. Separate the front and rear halves of the Outer Tub.
16026186 37