Maytag MAH6700AW Series Service page 58

U
SING THE
Step 4
S
ELECT
Press the arrow pad to select the Soil Level/washing time.
Heavy – Use for cleaning heavily soiled loads.
Medium – Use for cleaning moderately soiled loads.This setting will be
appropriate for most loads.
Light – Use for cleaning lightly soiled loads.
Step 5
S
ELECT
Press the appropriate pad(s) options.The indicator light
above the pad will illuminate when the option is selected.
Delay – Any cycle can be delayed for up to 9, 12 or 19 hours (select models
one hour increments.
1. Make the appropriate selections for your load.
2. Press the Delay pad until the desired delay time appears
in the display .
3. Press the Cycle Selector dial.The delay time will
start counting down.
4. T o cancel a delay , press the Power Off pad and restart.
Chime – Press the Chime pad to increase or decrease the end of cycle signal
volume or turn the signal off.
Control Lock – The washer controls can be lock ed to prevent
unwanted use by children.
1. Press the W ash/Rinse Temp and Spin Speed pads at the same time
for three seconds.
2.The Control Lock light will illuminate.
3. To unlock, press the Wash/Rinse Temp and Spin Speed pads at the
same time for three seconds.The Control Lock light will go out.
B-8
C
ONTROLS
S L
OIL EVEL
C O
YCLE PTIONS
16026186
Control features vary by model.
cont.
©2006 Maytag Services