Clean Radiator & Screen - Ferris IS2000Z Diesel Operator's Manual

Regular Maintenance
Change Engine Coolant cont'd.
7. Run the engine until it is at operating temperature.
Check the level of engine coolant in the reserve
tank. When the engine is running and the engine
coolant is at normal temperature, the coolant level
in the tank should be at the FULL (HOT) (D,
Figure 28) mark. If the engine coolant is not at the
FULL (HOT) mark, add additional engine coolant
to the reserve tank to bring the level to the FULL
(HOT) mark.
CLEAN RADIATOR & SCREEN
Clean the radiator and screen before each use, or as
required (depending on conditions) to allow proper
air-flow through the radiator.
Removing the Radiator Screen:
1. Remove the rear radiator screen retaining bolts
(A, Figure 30) and remove the rear radiator screen
(B).
2. Slide the side radiator screens (C) out of the slots
in the rear of the hood.
3. Flush the screen with water or blow clean with air.
Flush the radiator core with water or blow clean
with air. See engine owners manual for proper
radiator cleaning procedures.
4. To reinstall the radiator screen, reverse removal
process.
34
A
C
Figure 30. Removing the Radiator Screens
A. Rear Radiator Screen Retaining Bolts
B. Rear Radiator Screen
C. Side Radiator Screen (Left Hand one shown.)
B
www.ferrisindustries.com