Canon Color ImageRunner C3380 Reference Manual page 221

1
(Additional Functions) ➞ [Common Settings] ➞ [Tray
Press
Designation].
2
Select the functions for which to designate output Trays A, B,
and C and the priority order of the trays ➞ press [OK].
The optional Saddle Finisher-Y2 is attached.
[Other] is used for designating a tray for printing reports.
[Receive/Fax] appears only if the optional Super G3 FAX Board or Super G3
Multi-Line Fax Board is installed. [Receive] appears only if the optional Super G3
FAX Board or Super G3 Multi-Line Fax Board is not installed.
If the optional Super G3 Multi-Line Fax Board is installed, you can set two
different trays for receiving faxes.
If you want to use an output tray for only one function, select only that function.
IMPORTANT
•
If a certain tray reaches its stacking limit, the machine automatically uses another
tray that is designated for the same function. However, it is recommended that you
only designate one tray for fax/I-fax documents to prevent them from getting lost.
•
If the optional Finisher-Z1 and Copy Tray-J1 are attached and the Staple mode is
set, the sheets are output to Tray A, regardless of the Tray Designation settings.
•
If the optional Finisher-Z1 and Copy Tray-J1 are attached and the following paper is
selected, the sheets are output to trays other than the Copy Tray-J1, regardless of
the Tray Designation settings: irregular paper size, envelopes, heavy paper,
transparencies, coated paper, labels, or tracing paper.
•
If the optional Inner 2way Tray-D1 and Copy Tray-J1 are attached and the following
paper is selected, the sheets are output to trays other than the Copy Tray-J1, even
if the Copy Tray-J1 is specified as the destination: irregular paper size, envelopes,
heavy paper, transparencies, coated paper, labels, or tracing paper.
Specifying Common Settings
4
4-41