NOTE
For instructions on entering characters, see "Entering Characters from the Touch
Panel Display," on p. 2-24.
Erasing an Image Form
1
Press
[Register Form for Form Composition].
2
Select the image form that you want to erase ➞ press [Erase].
NOTE
To check the image of the stored form, press [Check Print] ➞ select the paper size
➞ press [Start Print]. (See Chapter 4, "Special Copying and Mail Box Features," in
the Copying and Mail Box Guide.)
3
Press [Yes].
Setting the Image Priority
This mode enables you to set the machine to automatically select whether the print
quality of your original has priority or the print quality of the stored image form has
priority. You can also select these settings manually.
1
Press
[Image Priority for Form Composition].
2
Select [Auto], [Original Priority], or [Form Priority] ➞
press [OK].
Details of each item are shown below.
[Auto]:
[Original Priority]: Priority is given to the print quality of the original image.
[From Priority]:
(Additional Functions) ➞ [Common Settings] ➞
(Additional Functions) ➞ [Common Settings] ➞
The machine automatically selects the print quality of the
original and image form.
Priority is given to the print quality of the image form.
Specifying Common Settings
4
4-45