6
Press [Done].
If you selected [Transparency] in step 5, press [Overhead Project. Type] ➞ select
the type of overhead projector ➞ press [Done] ➞ [Done].
If you press [Stack Bypass Settings], follow the procedures and screens in step 4
to reset the paper size and type settings.
7
If the Copy function is selected, place your originals ➞ select
the desired copy settings.
If you are printing documents that are stored in an inbox, this step is not
necessary.
8
Press
(Start).
If you are printing documents that are stored in an inbox, press [Start Print].
Scanning starts.
NOTE
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Paper Size/Type Selected
Paper Size/Type
Currently Loaded
Making Prints Using the Stack Bypass
2
2-53