Sony SRX-R320 Installation Manual page 98

Message No. Error message
WARN_26 DOUSER ERROR
WARN_27 BALLAST ERROR
WARN_28 BALLAST ERROR
WARN_29 EXHAUST ERROR
WARN_30 COVER DETACHED
WARN_31 FAN ERROR
WARN_32 FAN ERROR
WARN_33 FAN ERROR
*1: Warning is displayed when the air volume at the outlet of the 8-inch duct is under 250 ft
The exhaust air volume required is 450 to 550 ft
FAILURE (Degree of risk: low)
Message No. Error message
FAIL_02 TEMPERATURE ERROR
FAIL_04 TEMPERATURE ERROR
FAIL_06 TEMPERATURE ERROR
FAIL_10 TEMPERATURE ERROR
FAIL_11 TEMPERATURE ERROR
FAIL_12 TEMPERATURE ERROR
FAIL_15 TEMPERATURE ERROR
FAIL_16 LENS ERROR
FAIL_17 LENS ERROR
FAIL_18 LENS ERROR
3-4
Trouble
DOUSER operation is failed.
A power unit for lamp communication
failed.
Lamp serial number setting is wrong.
The air volume of the 8-inch duct is
abnormal.
The fi lter cover is detached.
PS converter fan 2 in abnormal.
PS converter fan 1 in abnormal.
PBS fan in abnormal.
/min (12.7 to 15.6 m /min).
3 3
Trouble
Warning for temperature abnormality of
the 8-inch duct.
Intake temperature is abnormal.
The optical unit block temperature is
abnormal.
Warning for temperature abnormality of
the R panel.
Warning for temperature abnormality of
the G panel.
Warning for temperature abnormality of
the B panel.
Warning for temperature abnormality of
the power unit for lamp.
Zoom does not reach the registered
position.
Focus does not reach the registered
position.
Zoom operation is failed.
Remedy
Check the connector of a shift block.
Check the shift block. Replace the shift
block if it is damaged.
Check the cable between the power unit
for lamp and lamp house. Check the
power unit for lamp. Replace the power
unit for lamp if it is damaged.
Check the range setting of power unit for
lamp and the serial information of a lamp.
Check the air volume at the outlet of the
8-inch duct.*1
Check that the fi lter cover (door) is not
opened.
Check the PS converter fan 2. Replace
the PS converter fan 2 if it is damaged.
Check the PS converter fan 1. Replace
the PS converter fan 1 if it is damaged.
Check the PBS fan. Replace the PBS fan
if it is damaged.
/min (7 m /min).
3 3
Remedy
Check the outside air temperature, the
suction amount of a 8-inch duct, and the
lamp cooling fans.
Check the outside air temperature.
Check the outside air temperature, and air
supply and exhaust.
Check the outside air temperature, and air
supply and exhaust. Check the Peltier R.
Replace the Peltier R if it is damaged.
Check the outside air temperature, and air
supply and exhaust. Check the Peltier G.
Replace the Peltier G if it is damaged.
Check the outside air temperature, and air
supply and exhaust. Check the Peltier B.
Replace the Peltier B if it is damaged.
Check the outside air temperature. Check
the power unit for lamp. Replace the
power unit for lamp if it is damaged.
Check the function operation, lens, and
lens cable. Check the SY board. Replace
the SY board if it is damaged.
Check the function operation, lens, and
lens cable. Check the SY board. Replace
the SY board if it is damaged.
Check the lens and lens cable. Check the
SY board. Replace the SY board if it is
damaged.
(Continued)
SRX-R320