Panel (U4B) - Sony SRX-R320 Installation Manual

1-1-10. Panel (U4B)

1. Remove the panel (U7) block assembly. (Refer to Section 1-1-2.)
2. Remove the panel (U2) block assembly. (Refer to Section 1-1-3.)
3. Remove the panel (U3). (Refer to Section 1-1-4.)
4. Remove the panel (U6). (Refer to Section 1-1-5.)
5. Remove the panel (U5). (Refer to Section 1-1-6.)
6. Open the panel (U4) block assembly. (Refer to steps 1 and 2 in Section 1-1-9.)
7. Remove the four screws, then remove the panel (U4B)
in the direction of arrow with attention to the two
hooks.
8. To install, reverse the removal procedure.
SRX-R320
Screws
Panel (U4B)
Fig. 1-1-10
Screws
Hooks
1-7