Sony SRX-R320 Installation Manual page 43

5. Pack by soldering the end of the ground wire.
6. Attach the ground terminal removed in step 4 to the
ground wire, then fi x it with the screw.
7. Route the cable through the lower hole of the terminal
block, then fi x each terminal by screw.
8. Fix the cable with the cable clamp and screw.
9. Attach the terminal block cover.
SRX-R320
Screw
Ground terminal
Fig. 1-13c
Screws
Fig. 1-13d
Pack by soldering
Ground wire
Ground terminal
Cable clamp
Screw
1-37