2-7-2. Change in Setting of Registered Function Memory
1. Click the [SELECT] button from the FUNCTION MEMORY window.
2. Click the function memory No. you want to change, then click the [RECALL] button to call memory.
3. Change the item you want to change and click the [SELECT] button.
4. Confi rm the function memory No. and click the
[APPLY] button.
n
If you cannot click the [APPLY] button, set "LUMINANCE CONTROL" to "0".
Click the No. to be changed.
The circle (green) on the left of the number indicates that
the number is recalled.
[APPLY] and [RECALL] buttons
SRX-R320
[SELECT] button
Fig. 2-7-2a
Fig. 2-7-2b
2-35